Mixers, Spreaders & Seeders
Mixing Bucket
Mix and discharge compatible construction materials at the jobsite.
View productMixers, Spreaders & Seeders
Spreader
- Capacity
- 272 L
- Spread radius
- 3000–6000 mm
- Working pressure
- 16 MPa
- Weight
- 340 kg
Spreader specifications
| Specification | 272 L hopper |
|---|---|
| CapacityL | 272 |
| Spread radiusmm | 3000–6000 |
| Working pressureMPa | 16 |
| Weightkg | 340 |
| Lengthmm | 995 |
| Widthmm | 1380 |
| Heightmm | 1269 |
Product information
Description
Distribute compatible granular material from a documented 272 L hopper. Material density, spread pattern, spinner control, and hydraulic supply require review.
Tools for leveling, conditioning, compacting, raking, and preparing surfaces.
Fitment-first search
Select your machine
Serial numbers are used only to review fitment. Do not enter ownership or payment information.
Related products
Mixers, Spreaders & Seeders
Seeder
Distribute seed from a documented 150 L hopper across a 1,740 mm working width.
View product
Mixers, Spreaders & Seeders
Stabilized Soil Mixer
Blend stabilizing material into prepared soil with 60- and 72-inch configurations. Material, mixing depth, hydraulic supply, and pass plan require review.
View productProduct questions
Spreader FAQs
What work is Spreader intended for?
Distribute compatible granular material from a documented 272 L hopper. Material density, spread pattern, spinner control, and hydraulic supply require review.
Will Spreader fit every skid steer?
No. Confirm the loader make, model, serial number, rated capacity, and mounting interface before treating Spreader as a candidate. A compatible coupler alone does not confirm suitability for the machine or job.
Which hydraulic or electrical details are needed for Spreader?
If the attachment is powered, provide auxiliary flow and pressure, coupler type, case-drain requirement, electrical connector, and control method. These requirements must be checked against the carrier.
Which job details affect Spreader selection?
Describe the material, required working width or capacity, target result, site conditions, obstacles, slope, and expected duty cycle. These details help determine whether the attachment configuration is appropriate.
What should I submit for a Spreader quote?
Send the machine plate, coupler and hose photos, hydraulic and electrical information, attachment dimensions, intended job, and any readable labels or markings. Availability and final compatibility are confirmed during quote review.