Couplers & Mounts
Quick Coupler
Connect compatible attachments to the loader interface.
View productCouplers & Mounts
Tilt-Tatch
- Tilt angle
- ±18 °
- Working pressure
- 16 MPa
- Weight
- 140 kg
- Length
- 230 mm
Tilt-Tatch specifications
| Specification | ±18° tilt |
|---|---|
| Tilt angle° | ±18 |
| Working pressureMPa | 16 |
| Weightkg | 140 |
| Lengthmm | 230 |
| Widthmm | 1440 |
| Heightmm | 580 |
Product information
Description
A hydraulic tilting mount providing documented ±18-degree attachment angle. Interface, added load center, hydraulic circuit, and compatible attachments require review.
Special-purpose tools, mounting interfaces, and supporting attachment hardware.
Fitment-first search
Select your machine
Serial numbers are used only to review fitment. Do not enter ownership or payment information.
Related products
Couplers & Mounts
Water Kit
A twin-tank water kit documented as a sweeper accessory. Mounting, pump, hose, electrical, and compatible sweeper details require quote review.
View product
Couplers & Mounts
High Throwing Snow Tube
A high-discharge tube documented as a snowblower accessory. Chute interface, rotation control, discharge direction, and compatible snowblower require confirmation.
View productProduct questions
Tilt-Tatch FAQs
What work is Tilt-Tatch intended for?
A hydraulic tilting mount providing documented ±18-degree attachment angle. Interface, added load center, hydraulic circuit, and compatible attachments require review.
Will Tilt-Tatch fit every skid steer?
No. Confirm the loader make, model, serial number, rated capacity, and mounting interface before treating Tilt-Tatch as a candidate. A compatible coupler alone does not confirm suitability for the machine or job.
Which hydraulic or electrical details are needed for Tilt-Tatch?
If the attachment is powered, provide auxiliary flow and pressure, coupler type, case-drain requirement, electrical connector, and control method. These requirements must be checked against the carrier.
Which job details affect Tilt-Tatch selection?
Describe the material, required working width or capacity, target result, site conditions, obstacles, slope, and expected duty cycle. These details help determine whether the attachment configuration is appropriate.
What should I submit for a Tilt-Tatch quote?
Send the machine plate, coupler and hose photos, hydraulic and electrical information, attachment dimensions, intended job, and any readable labels or markings. Availability and final compatibility are confirmed during quote review.