Fitment-first sourcingQuote-only serviceMulti-brand supportNeed help? Contact us

Hydraulics · 11 min read

Skid Steer Hydraulic Oil: Check More Than ISO Grade

Skid steer hydraulic oil selection requires more than a matching ISO grade. The applicable equipment manual can also specify a minimum viscosity index and a temperature range, while the oil's product data sheet reports its own test values and approval statements. Compare each field separately, and confirm with the equipment manufacturer whether a named oil is an approved replacement; matching two numbers is not enough.

A historical Bobcat S450 chart and a 2019 Chevron Rando HDZ 46 data sheet illustrate the difference. The chart's VG 46 and minimum viscosity index of 150 can be compared with the product sheet's ISO 46 and typical viscosity index of 153. That is a partial numerical match. Before choosing the oil, confirm the actual machine, the current regional product and the applicable equipment manufacturer's guidance.

Skid steer hydraulic oil OEM specification and product sheets need a model, region, and revision

Historical document identities
Document identityEquipment manualOil product data sheet
Named equipment or productBobcat S450 skid-steer loaderChevron Rando HDZ 46, product number 773261
Scope identifierS/N B1ED11001 & Above; ALA iT4Products manufactured in Colombia and El Salvador
Document revision6990811enUS (12-18) (J), copyright 20181 November 2019; IO-174
Relevant locationsPrinted p. 169 / PDF p. 171, Figure 249; p. 103 / PDF p. 105, cold-start notice; p. 180 / PDF p. 182, chaincasePDF p. 2: approval wording; PDF p. 3: typical test data

The Bobcat-authored S450 Operation & Maintenance Manual is available through an Australian rental-company mirror. Its cover identifies the serial range, configuration and edition. Before using its chart, match that serial range, configuration and edition to the actual loader; the enUS document code alone does not extend this edition to every S450 in the United States.

The Chevron Rando HDZ product data sheet identifies its manufacturing scope and date on page 1. It serves here as a dated example of product fields. For a current US product, ask the supplier for that product's regional data sheet and revision before comparing formulation or specifications, because the product name alone does not identify which sheet applies.

The OEM skid steer hydraulic oil chart combines ISO viscosity grade, index, and temperature range

Figure 249 in the historical S450 manual recommends Bobcat hydraulic fluids. Its alternative-fluid wording applies when Bobcat hydraulic fluid is unavailable and calls for a good-quality hydraulic fluid meeting the chart's viscosity grade and viscosity index. The chart also labels its temperature axis “temperature range anticipated during machine use.”

Figure 249 is titled “Hydraulic / Hydrostatic Fluid,” and printed page 180 (PDF page 182) says the chaincase “uses the same type fluid as the hydraulic / hydrostatic system.” On this S450 edition, one fluid choice therefore reaches all three systems.

Historical S450 alternative-fluid chart
Alternative-fluid entry in Figure 249Minimum viscosity indexApproximate chart range anticipated during machine use
ISO VG 46150−40°C to +27°C, or −40°F to +80°F
ISO VG 100130+4°C to +49°C, or +40°F to +120°F

These ranges are approximate readings of the graph's marked endpoints. They belong to the S450 serial range, configuration and manual edition identified above (printed page 169, PDF page 171, Figure 249).

A chart range that reaches −40°C still leaves the manual's cold-start instruction to follow. An IMPORTANT notice on printed page 103 (PDF page 105) of the same manual says: “When the temperature is below −30°C (−20°F), hydrostatic oil must be warmed before starting. The hydrostatic system will not get enough oil at low temperatures and will be damaged.” It also says to park the machine where the temperature will be above −18°C (0°F) if possible. The notice is a general instruction in this S450 edition, separate from the chart entries; for another machine or edition, check the cold-start notice in that machine's own manual.

The limits tie the grade to expected temperature. Expected machine use above about +27°C (+80°F) falls outside the VG 46 bar, and expected use below about +4°C (+40°F) falls outside the VG 100 bar. Both bars cover the span between those points, so for expected use within that span, ask the equipment manufacturer which grade applies; the figure itself sets no rule for choosing between them. Only the three Bobcat fluid entries run across the whole axis, so neither alternative entry alone covers the chart's full −40°C to +49°C range. The Rando HDZ 46 comparison in this article applies only within the VG 46 bar. Chevron's sheet addresses high temperatures separately on PDF page 2: refer to the equipment's service manual to ensure minimum fluid viscosity requirements are met at the highest operating temperature.

VG means viscosity grade; VI means viscosity index. The grade and index are separate fields in the chart, with a different minimum index attached to each listed grade. Chevron's sheet links a high viscosity index to “minimum change in viscosity over a wide range of operating temperatures” (PDF page 1). Treating “46” as the complete requirement would drop both the minimum VI and the machine-use temperature range.

The chart's machine-use range also differs from a laboratory test temperature. A viscosity value measured at 40°C describes the oil at that test temperature. For starting or operating a particular loader at a given temperature, check that loader's own manual.

A skid steer hydraulic oil data sheet uses separate ISO viscosity grade and temperature fields

2019 regional Rando HDZ typical test data
Field on the 2019 Rando HDZ sheetISO 46 columnWhat to check
ISO grade46Whether the manual lists this grade for the expected machine-use temperatures
Kinematic viscosity at 40°C46.0 cStCompare it only with another value measured at 40°C
Kinematic viscosity at 100°C8.2 cStCompare it only with another value measured at 100°C
Viscosity index153Whether the typical value reaches the chart's minimum for the selected grade
Pour point−45°CA product test property; do not read it as the machine's starting or use limit

The source table is headed “Typical Test Data” on PDF page 3 and states that minor variations in typical data are expected in normal manufacturing. Treat these figures as typical values for this dated regional product, and ask the supplier for current data on a newly supplied batch.

On PDF page 2, Chevron uses “approved for” for specified Eaton-Vickers, Fives Cincinnati and Parker criteria. Its separate “meet the requirements of” list includes ASTM D6158 HV, DIN 51524-3 and ISO 11158 L-HV, among other entries. The Fives Cincinnati entry, for example, assigns P-70 to ISO 46; the Parker entry names HF0, HF1 and HF2 using the T6H20C pump.

Separate columns compare the historical S450 VG 46 requirement with dated regional Rando HDZ 46 test fields, keeping machine-use temperature distinct from pour point.
S450 manual 6990811enUS (12-18) (J), Figure 249 and printed p. 103, and Chevron IO-174 dated 1 November 2019. The temperature range is an approximate graph reading; product properties are typical regional data.

A partial ISO grade match does not approve skid steer hydraulic fluid substitution

What the two documents show and what to confirm next
Comparison questionWhat the two documents showWhat to confirm next
Does the named product have the selected chart grade?The product sheet identifies ISO 46; the selected S450 chart entry is VG 46Confirm that the selected chart entry applies to the actual machine and conditions
How does the reported VI compare?The product's typical VI of 153 is numerically above the chart's minimum of 150Confirm the application with the equipment manufacturer; a typical regional product value is not a complete application approval
Does the pour point confirm the chart's machine-use range?No: the two fields describe different properties or conditionsCheck starting and operating suitability in the machine manual; the S450 manual's warm-before-starting notice below −30°C (−20°F) applies separately from pour point
Does the product sheet state Bobcat S450 approval?No; the 2019 sheet does not list Bobcat S450 approvalAsk the equipment manufacturer about S450 use, and treat the missing listing as an open question rather than as incompatibility
Does the sheet describe today's locally offered product?It identifies a 2019 product manufactured in Colombia and El SalvadorAsk the supplier for the current regional SKU and current product data sheet

The two documents line up on two numbers: grade 46 aligns numerically, and the listed VI of 153 exceeds the selected minimum of 150. Whether this oil suits the machine, its temperatures and the systems it would serve is a question for the equipment manufacturer, so describe the result as a partial numerical match rather than as “compatible.”

ISO 46 and typical VI 153 are compared with VG 46 and minimum VI 150, followed by what to confirm next: the machine, current product, temperature suitability and manufacturer approval.
S450 PDF page 171 and 2019 Rando HDZ PDF pages 2–3 support a partial numerical comparison.

Final skid steer hydraulic oil selection needs current regional product and machine evidence

Items to collect and record before choosing a hydraulic oil
Item to collect before choosing an oilDetail to record
Machine identityActual model, serial number and relevant configuration
Current applicable equipment instructionsManual identifier, revision, fluid recommendation, chart and source page
Systems servedEach system the applicable manual assigns to this fluid; on this S450 edition, hydraulic, hydrostatic and chaincase
Operating conditionsTemperatures anticipated during machine use, any cold-start notice in the manual, and any conditions requiring manufacturer clarification
Offered oil identityExact product name, grade, regional SKU and market
Current regional product data sheetRevision date, relevant viscosity fields, units, test temperatures and exact approval wording
Application confirmationApplicable OEM guidance or written clarification tied to the identified machine and oil

This fluid record belongs beside the hydraulic service task in the broader skid steer maintenance schedule, which keeps the machine's service tasks, intervals and service history together.

When the same service also involves filters, the skid steer filter-kit fitment checklist reconciles each filter position against the actual machine; choose the oil itself with the documents above.

When a value is missing, ask the supplier for it rather than borrowing it from another region's sheet or a similarly named oil. When writing to the applicable equipment manufacturer, include the side-by-side comparison and ask the open question directly, such as whether the current regional product meets the requirements for the actual machine and operating conditions.

A numerical comparison is complete once both documents are identified and each requirement has a corresponding product field or a question listed for the supplier or manufacturer. Choose the fluid once the applicable machine manual, current product data and the equipment manufacturer's answers settle those questions. Ask the equipment manufacturer about mixing oils and about a drain-and-fill procedure; this comparison covers neither.

Skid steer hydraulic oil questions

Does matching ISO 46 make an alternative oil suitable for the loader?

Not by itself. A matching ISO 46 label answers the grade question only; in the historical S450 example, the selected chart entry also carries a minimum viscosity index and a machine-use temperature range. If a supplier confirms only ISO 46, ask for the current regional product's viscosity index, check the expected machine-use temperatures against the chart, and confirm substitute approval with the equipment manufacturer.

Can an oil's pour point be used as the machine's cold-start limit?

No. The dated Rando HDZ 46 sheet reports a typical pour point as a product test property, while the S450 manual gives its own starting instruction: below −30°C (−20°F), hydrostatic oil must be warmed before starting. Follow that notice whatever the oil's pour point, and take the warm-up instruction from the machine manual.

Do “approved for” and “meets the requirements of” mean the same thing on an oil data sheet?

No. The 2019 Chevron sheet places them under separate headings, so read a criterion listed under “meet the requirements of” as Chevron's statement that the oil meets it, not as an OEM approval. Neither list names Bobcat S450; ask the equipment manufacturer about S450 use rather than reading the missing name as either approval or incompatibility.

Does a hydraulic-fluid comparison also cover the hydrostatic drive or chaincase?

Not automatically. The applicable machine manual must identify which systems the fluid serves. On this S450 edition, Figure 249 is titled for hydraulic and hydrostatic fluid, and the chaincase uses the same type of fluid. The 2019 Rando HDZ sheet names neither hydrostatic nor chaincase use, so confirm suitability for each of these systems with the equipment manufacturer, and do not read the missing mention as incompatibility.

Why does one fluid use an ISO grade and another an SAE grade?

Precision Lubrication reports that industrial hydraulic oils are typically identified by ISO grades such as 32, 46, 68 or 100, while some hydraulic oils for mobile equipment carry SAE grades such as 10W, 30 or 40; it attributes the difference to formulation history. ISO VG and SAE are different viscosity designation systems, and ISO VG classification uses kinematic viscosity at 40°C. When comparing product sheets, keep each stated system, measurement temperature and unit, and confirm any replacement with the equipment manufacturer; a similar-looking number or viscosity range is not enough.
WhatsApp