Linkage Rods & Pins
Linkage rods and pivot pins. Compare overall length, diameter, end geometry, retaining method, and installed position.
View product pageLift Arm & Quick Attach
Pins & Bushings
Product pages
Pins & Bushings
Pins & Bushings guide
Pins & Bushings
Pivot pins, bushings, and retaining hardware.
Tie every pin and bushing to a named pivot and installed side. Measure pin diameter and working length, head, thread, groove and retention; then record bushing bore, outside diameter, length, flange, grease path, press fit, and the condition and alignment of the surrounding bores.
Use the machine identity, installed function, measurable interfaces, readable markings, and source photos together. A matching shape, connector, or single dimension is not proof of fitment.
Identification starting points
Three evidence paths to use together
Machine and function
Record the complete machine identity, installed system, exact position, and job performed by the component.
Interfaces and dimensions
Measure the physical features that connect, mount, seal, rotate, guide, or retain this loader structure and interface part.
Identifiers and source evidence
Capture labels, part and casting numbers, revisions, full views, close-ups, and the surrounding assembly.
Selection checklist
Details to compare before requesting a match
- Machine identityBrand, full model, serial or PIN, loader interface, and installed configuration.
- Installed positionLift arm, linkage, quick attach, mount plate, guard, panel, or counterweight location.
- Pivot geometryPin diameter, bore, bushing, spacing, grease path, and retention method when present.
- Interface dimensionsPlate width, height, angles, hooks, wedges, mounting holes, and clearances.
- Condition and functionWear, deformation, missing hardware, movement, and the component's exact job.
- Identifiers and photosPart or casting number, markings, full installed views, and measured details.
Frequently asked questions
Pins & Bushings identification
Can pins & bushings be confirmed from appearance alone?
No. Similar-looking candidates can differ in dimensions, interfaces, internal configuration, material, or application. Use appearance only as a starting clue and compare machine identity, installed position, pivot geometry, interface dimensions together with readable identifiers.
What if the original part number cannot be read?
Provide the machine brand, full model, serial or PIN, exact installed position, overall photos, close-ups of every marking, and the measurable loader structure and interface part interfaces. Missing identification data should remain unverified rather than being guessed.
Why does the installed position matter?
Pins & Bushings can change by machine side, function, parent assembly, serial range, or option package. The installed location helps distinguish candidates that otherwise share a similar shape or connector.
Does a catalog candidate mean the part fits?
No. A result only places the item within the Pins & Bushings review path. Fitment remains unverified until the machine record, identifiers, dimensions, interfaces, and installed configuration have been reviewed together.
What photos help identify pins & bushings?
Include the installed context, a full view of the component, every side and mating interface, readable labels or castings, and close-ups of critical measurements. Keep the parent assembly or mating component visible where practical.
Still not sure which part you have?
Send the component and machine evidence for review
Include the installed position, readable identifiers, interfaces, dimensions, source photos, and full machine identity.
Fitment-first search
Select your machine
Serial numbers are used only to review fitment. Do not enter ownership or payment information.